Don Peterkofsky
2006-11-19 07:25:14 UTC
A few pieces of initial feedback regarding this version and Katana support:
1. I have also noticed some issues with the calendar. Specifically, after
reading the calendar data from the phone, the event alarm times displayed in
bitpim are incorrect compared to the data in the phone. For example, an
alarm time in the phone of 30min was shown in bitpim as 19, and an alarm
time of 10min in the phone was shown in bitpim as -1617. Not sure if this
is specific to new Sanyo/Katana, or not.
2. I've been able to easily pair the Katana with my PC over Bluetooth via
DUN, and the phone shows up as COM6. Should it be possible to successfully
transmit calendar data to/from the phone in bitpim using this serial port?
Currently, when I try this, bitpim times out making the connection, with
this info in the log:
---------------------
20:35:07.046 COM6: Opening port COM6, 115200 baud, timeout 3.000000,
hardwareflow 0, softwareflow 0
20:35:08.578 COM6: Open of comm port suceeded
20:35:08.592 SCP-6600: Attempting to contact phone
20:35:11.655 COM6: Timed out - flushing and trying again
20:35:14.671 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:14.717 COM6: Changed port speed to 38400
20:35:18.233 COM6: Timed out - flushing and trying again
20:35:21.250 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:21.265 COM6: Changed port speed to 115200
20:35:24.780 COM6: Timed out - flushing and trying again
20:35:27.796 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:30.858 COM6: Changed port speed to 115200
20:35:34.453 COM6: Changed port speed to 19200
20:35:38.046 COM6: Changed port speed to 230400
20:35:44.655 COM6: Timed out - flushing and trying again
20:35:47.655 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:47.687 COM6: Changed port speed to 38400
20:35:51.203 COM6: Timed out - flushing and trying again
20:35:54.217 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:54.265 COM6: Changed port speed to 115200
20:35:57.780 COM6: Timed out - flushing and trying again
20:36:00.780 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:36:00.780 Error: Device needs attention - SCP-6600 on COM6
SCP-6600 on COM6: The phone is not responding while transitioning mode from
none to phonebook
---------------------
Thanks,
Don P.
-----Original Message-----
From: bitpim-user-***@lists.sourceforge.net
[mailto:bitpim-user-***@lists.sourceforge.net] On Behalf Of Joe Pham
Sent: Saturday, November 18, 2006 5:51 PM
To: ***@gmail.com; bitpim-***@lists.sourceforge.net
Subject: Re: [BitPim-user] 0.9.0.08 Calendar issue
Did you see the tooltip window?
-Joe Pham
1. I have also noticed some issues with the calendar. Specifically, after
reading the calendar data from the phone, the event alarm times displayed in
bitpim are incorrect compared to the data in the phone. For example, an
alarm time in the phone of 30min was shown in bitpim as 19, and an alarm
time of 10min in the phone was shown in bitpim as -1617. Not sure if this
is specific to new Sanyo/Katana, or not.
2. I've been able to easily pair the Katana with my PC over Bluetooth via
DUN, and the phone shows up as COM6. Should it be possible to successfully
transmit calendar data to/from the phone in bitpim using this serial port?
Currently, when I try this, bitpim times out making the connection, with
this info in the log:
---------------------
20:35:07.046 COM6: Opening port COM6, 115200 baud, timeout 3.000000,
hardwareflow 0, softwareflow 0
20:35:08.578 COM6: Open of comm port suceeded
20:35:08.592 SCP-6600: Attempting to contact phone
20:35:11.655 COM6: Timed out - flushing and trying again
20:35:14.671 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:14.717 COM6: Changed port speed to 38400
20:35:18.233 COM6: Timed out - flushing and trying again
20:35:21.250 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:21.265 COM6: Changed port speed to 115200
20:35:24.780 COM6: Timed out - flushing and trying again
20:35:27.796 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:30.858 COM6: Changed port speed to 115200
20:35:34.453 COM6: Changed port speed to 19200
20:35:38.046 COM6: Changed port speed to 230400
20:35:44.655 COM6: Timed out - flushing and trying again
20:35:47.655 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:47.687 COM6: Changed port speed to 38400
20:35:51.203 COM6: Timed out - flushing and trying again
20:35:54.217 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:35:54.265 COM6: Changed port speed to 115200
20:35:57.780 COM6: Timed out - flushing and trying again
20:36:00.780 COM6: Timed out waiting for 7e, requested bytes 1 - 0 bytes
read
20:36:00.780 Error: Device needs attention - SCP-6600 on COM6
SCP-6600 on COM6: The phone is not responding while transitioning mode from
none to phonebook
---------------------
Thanks,
Don P.
-----Original Message-----
From: bitpim-user-***@lists.sourceforge.net
[mailto:bitpim-user-***@lists.sourceforge.net] On Behalf Of Joe Pham
Sent: Saturday, November 18, 2006 5:51 PM
To: ***@gmail.com; bitpim-***@lists.sourceforge.net
Subject: Re: [BitPim-user] 0.9.0.08 Calendar issue
Did you see the tooltip window?
-Joe Pham