Post by Roger BinnsAlso detection of the VX4400 doesn't happen when using a
USB to serial cable.
Actually it looks like it has been completely broken. For
some reason AT$CDMG is no longer sent which means the phone
never enters Brew mode.
This is the log from a freshly restarted BitPim and rebooted
phone:
21:20:02.640 COM5: Opening port COM5, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0
21:20:02.765 COM5: Open of comm port suceeded
21:20:02.765 LG-VX4400: Attempting to contact phone
21:20:02.765 LG-VX4400: Retrieving fundamental phone information
21:20:02.780 LG-VX4400: Phone serial number
21:20:02.780 LG-VX4400: Getting file contents 'nvm/$SYS.ESN'
21:20:02.780 LG-VX4400: brew request Data - 2 bytes
<#! p_brew.memoryconfigrequest !#>
00000000 59 0c Y.
21:20:05.780 COM5: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
21:20:05.780 COM5: Incomplete read was Data - 0 bytes
21:20:05.828 COM5: Changed port speed to 38400
21:20:06.328 LG-VX4400: brew request Data - 2 bytes
<#! p_brew.memoryconfigrequest !#>
00000000 59 0c Y.
21:20:09.328 COM5: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
21:20:09.328 COM5: Incomplete read was Data - 0 bytes
21:20:09.375 COM5: Changed port speed to 115200
21:20:09.875 LG-VX4400: brew request Data - 2 bytes
<#! p_brew.memoryconfigrequest !#>
00000000 59 0c Y.
21:20:12.875 COM5: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
21:20:12.875 COM5: Incomplete read was Data - 0 bytes
21:20:12.905 Error: Device needs attention - LG-VX4400 on COM5
LG-VX4400 on COM5: The phone is not responding while transitioning mode from none to brew.
See the help for troubleshooting tips
Roger