[Bitpim-devel] follow up (dmesg output)

[Paul Traina]

Dang, sorry, I forgot to add this... output from my kernel

yellow flag?

usb 5-1: new full speed USB device using address 2
usb 5-1: device not accepting address 2, error -110
usb 5-1: new full speed USB device using address 3
usb 5-1: device not accepting address 3, error -110
usb 5-1: new full speed USB device using address 4
usb 5-1: device not accepting address 4, error -110
usb 5-1: new full speed USB device using address 5
cdc_acm 5-1:1.0: ttyACM0: USB ACM device<6>drivers/usb/core/usb.c: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
usb 5-1: USB disconnect, address 5

also, "no modules for USB product 1004/6000/0" was output by hotplug on
stderr

[Roger Binns]

Post by Paul Traina
also, "no modules for USB product 1004/6000/0" was output by hotplug on

That doesn't matter. Interface 0 is an interrupt interface and is paired
with interface 1 (bulk/modem).

Roger