[BitPim-devel] BitPim Official Release 1.0.6 available

[Joe Pham]

Grab it from:

<http://sourceforge.net/project/showfiles.php?group_id=75211&package_id=75636&release_id=620234>

Changes in this release:

* Bug fix: LG VX-8800/10000 Note Pad.
* Improvement: LG AX-8600 Call History and Note Pad (patch submitted by
David Ritter).
* Bug fix: LG VX-8500/8800/10000: better BREW file access (i.e. fewer "file
block" errors).
* Bug fix: LG VX-9900: access to the mmc1 dir via Command Line Interface
(CLI).
* Bug fix: Motorola: BitPim failed to read phonebook from some Motorola
models.
* Improvement: Call History: Navigate to other subtrees.
* Bug fix: SCP-6650: Fix Katana-II phone/port detection
* Add "extrazero" fields to listfile and listdirectory responses so that
filesystem view will work for Samsung SPHA-900. May break filesystem view
for other phones.
* New phone support: Sanyo SCP-8400
* New phone support: LG VX-9100 (enV2)
* Bug fix: Can't view Data Recording files on non-Intel Mac.
* Bug fix: Correctly process BREW special files.
* New phone support: LG VX-8560
* New Phone support: LG VX-9700
* New Phone support: LG VX-8610
* Bug fix: LG VX-9900 SMS support.
* Bug fix: Sanyo SCP-7500. Correctly read date on Sent messages.
* Maintenance: Upgrade build script.
* New phone support: LG LX-570 (Musiq) (Initial)
* Bug fix: Support for the LG VX-8800 V4, LG VX-8550 V4, and LG VX-10000
V9.
* Bug fix: Calendar Import Filter dialog raised exception.
* Improvement: In the Get Data from Phone and Send Data to Phone dialog,
clicking on either the Add or Replace All selection of a row will also
enable that row.
* Improvement: Edit PhoneBook Entry dialog: add/edit ICE setting.
* Bug fix: LG VX-8350, LG VX-8550: failed to read/write large files.


____________________________________________________________
Looking for insurance? Compare and save today. Click here.
http://thirdpartyoffers.netzero.net/TGL2231/fc/Ioyw6ijmN4LBVhRFV8DhkJRWyElzdQLvuYvJBwSOuWkuyDBCrO1mIk/

[Don Lewis]

I have a Sanyo Katana SCP-6600. When trying to read the data from the phone I recieve an error.

SCP-6600 on COM5: The phone is not responding while transitioning mode from none to phonebook. See Trouble shooting tips.

I can query the modem successfully through the Device Manager.

I have powered the phone down, removed the battery, disconnected and reconnected the cable several times. Nothing seems to help.

I did notice in the release notes there was a bug fix for the SCP-6650 could that have an effect on this model?

Suggestions?

Don L.

[Don Lewis]

Additionally, I have been able to connect and read data from this phone with DataPilot.

Don L.

-----Original Message-----
From: bitpim-devel-***@lists.sourceforge.net
[mailto:bitpim-devel-***@lists.sourceforge.net]On Behalf Of Don
Lewis
Sent: Tuesday, August 19, 2008 9:39 AM
To: bitpim-***@lists.sourceforge.net
Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem


I have a Sanyo Katana SCP-6600. When trying to read the data from the phone I recieve an error.

SCP-6600 on COM5: The phone is not responding while transitioning mode from none to phonebook. See Trouble shooting tips.

I can query the modem successfully through the Device Manager.

I have powered the phone down, removed the battery, disconnected and reconnected the cable several times. Nothing seems to help.

I did notice in the release notes there was a bug fix for the SCP-6650 could that have an effect on this model?

Suggestions?

Don L.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

[Stephen Wood]

I will look into this.

In the meantime, make sure that BitPim is using the same port that DataPilot
uses. I believe that the driver creates two COM ports for this phone and
perhaps only the detection of which port to use for the Katana got messed up
in 1.06.

Stephen

Post by Don Lewis
Additionally, I have been able to connect and read data from this phone with DataPilot.
Don L.
-----Original Message-----
Lewis
Sent: Tuesday, August 19, 2008 9:39 AM
Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
I have a Sanyo Katana SCP-6600. When trying to read the data from the

phone I recieve an error.

Post by Don Lewis
...

[Don Lewis]

Thank you Stephen, will post if that solves the issue.

Don L.

-----Original Message-----
From: bitpim-devel-***@lists.sourceforge.net [mailto:bitpim-devel-***@lists.sourceforge.net]On Behalf Of Stephen Wood
Sent: Tuesday, August 19, 2008 1:53 PM
To: bitpim-***@lists.sourceforge.net
Subject: Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem


I will look into this.

In the meantime, make sure that BitPim is using the same port that DataPilot uses. I believe that the driver creates two COM ports for this phone and perhaps only the detection of which port to use for the Katana got messed up in 1.06.

Stephen

Post by Don Lewis
Additionally, I have been able to connect and read data from this phone with DataPilot.
Don L.
-----Original Message-----
Lewis
Sent: Tuesday, August 19, 2008 9:39 AM
Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
I have a Sanyo Katana SCP-6600. When trying to read the data from the phone I recieve an error.
...

[Stephen Wood]

I tested BitPim 1.0.6 on both Linux and Windows (XP) with the Katana
(6600). On both systems BitPim was able to detect the phone at the correct
port and download the phonebook.

On Windows I installed the Sprint Connection manager to get the phone
drivers. I am pretty sure that I have tried DataPilot drivers with this
phone before.

Stephen

Post by Don Lewis
Thank you Stephen, will post if that solves the issue.
Don L.
-----Original Message-----
*Sent:* Tuesday, August 19, 2008 1:53 PM
*Subject:* Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
I will look into this.
In the meantime, make sure that BitPim is using the same port that
DataPilot uses. I believe that the driver creates two COM ports for this
phone and perhaps only the detection of which port to use for the Katana got
messed up in 1.06.
Stephen

Post by Don Lewis
Additionally, I have been able to connect and read data from this phone

with DataPilot.

Post by Don Lewis
Don L.
-----Original Message-----
Lewis
Sent: Tuesday, August 19, 2008 9:39 AM
Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
I have a Sanyo Katana SCP-6600. When trying to read the data from the

phone I recieve an error.

Post by Don Lewis
...

[ststephen]

Hi,

I have an LG VX-8560 - I installed bitpim 1.0.6 and tried to upload my MP3
ringtone - I was able to copy it to the /ringers folder, but after rebooting
the phone it doesn't find the new ringtone.

Did I put it in the right folder? In a video for the vx8500 it referenced
the /brew/[number] folder, which seems not to exist on the 8560.

Any tips appreciated, thanks.

Post by Joe Pham
* New phone support: LG VX-8560

[Nathan Hjelm]

You need to put the ringtone in /brew/mod/10889/ringtones in order for
the phone to see the new ringtone.

-Nathan Hjelm

Post by ststephen
Hi,
I have an LG VX-8560 - I installed bitpim 1.0.6 and tried to upload my MP3
ringtone - I was able to copy it to the /ringers folder, but after rebooting
the phone it doesn't find the new ringtone.
Did I put it in the right folder? In a video for the vx8500 it referenced
the /brew/[number] folder, which seems not to exist on the 8560.
Any tips appreciated, thanks.

Post by Joe Pham
* New phone support: LG VX-8560

--
View this message in context: http://www.nabble.com/BitPim-Official-Release-1.0.6-available-tp19016193p19073604.html
Sent from the Bitpim - Dev mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's
challenge
Build the coolest Linux based applications with Moblin SDK & win
great prizes
Grand prize is a trip for two to an Open Source event anywhere in
the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
BitPim-devel mailing list
https://lists.sourceforge.net/lists/listinfo/bitpim-devel